NEW BUILD - 16.45m Workboat

ID: 424059

Survey: 2C / 2D. Main Engine: 2 x Volvo TAMD122A 400BHP @ 1900 RPM. Gearboxes: 2 x Twin Disc MG514 / std ratios of 5.16:1 Fuel: 2 x 7250 litres. Propellers: 2 x 5BL Kaplan type approx 1100mm Ø. Generator: 1 x 100kVa genset. Deck Winch: 30 Tonne central deck winch. Deck Cranes: 4.6 Tonne Palfinger.

NEW BUILD - Sea Vizion W Series

ID: 1378

Sea VIZion Series is a family of small workboats, specifically designed to offer safety, functionality and durability even in extreme working conditions. The Sea Vizion W Series is characterized by the rectangular hull shape. This provides maximum lift force and decreases the draft of the boat, makeing these boats ideal for shallow waters while also ensuring great stability and maximum storage area. The edges of the hull has been made by bending technique which provides fuel efficiency and structural integrity. They are available in 3 sizes: SEA VIZION W600, Length Overall 6.00 m. SEA VIZION W500, Length Overall 5.00 m. SEA VIZION W400, Length Overall 4.00 m. Sea VIZion boats are built to work in the most extreme weather and temperature conditions. The whole family is literally unsinkable, with collar tubes that thanks to HDPE construction will last forever. These boats will accompany you in your most difficult tasks on the seas around the globe.

NEW BUILD - 5m Alloy Tube Workboat.

ID: 1438

Looking for a sturdy platform to do a bit of diving from? Available now is a new build out of Bali that is a 5.25m aluminium pontoon dingy that can carry 6 persons with dive gear. Recommended power a single OBM 40 – 80 HP max. Build time 45 days.

NEW BUILD - 10.3m Multi-Purpose Cat Landing Craft

ID: 3385

Designed by the renowned designer Rick Welin (Canada) this very versatile workboat can handle serious loads for her size. Whether you need a Landing Craft, Dive Boat, Recovery Platform, Fish-Farm Tender, Portable Work Platform, Crew Boat, or ALL of the above, she can handle the job. This is a "Do Anything" coastal worker, and she's trailerable. Designed to Lloyd's Registry Small Craft Scantlings rules for workboats she'll pass muster in any workboat category. The through-deck Moon-Pool allows her to hover above underwater loads for lifting at her center of flotation which allows a lifting capacity beyond that of any deck-mounted Hiab type of configuration. (NOTE: She can be built without the moon-pool as well). Other cabin sizes and configurations can be created as modifications to suit the owner needs. You may need an open deck with center console, or a small hardtop for instance. Or a larger cabin for crew-boat or water-taxi type of operations. 6mm bottom plating with beaching plates means never having to worry about landing on gravel shorelines, and her twin hulls mean you can ground her on any tidal flat and she'll sit level to provide versatility. Catamaran hulls lend themselves to beached stability beyond any mono-hull Landing Craft. Outboard power allows for a range of powering options depending on budget or speed requirements and affords the busy commercial operator the ability to upgrade or re-power at any time without significant downtime.

NEW BUILD - All Purpose 8m Work Boat

ID: 1364

LAVAMPOSTO 800 is a tough, aluminum boat suitable for a variety of demanding applications. With a deep dead rise and reverse chine, this 8 Mt handles chop exceptionally well and can be configured in a variety of layouts to suit different uses : fishing/expedition boat, charter boat, research vessel, dive boat, rescue vessel or patrol boat. Every LAVAMPOSTO 800 is custom built and fully outfitted with all the necessary features and specifications that are exactly right for the duties it will be expected to perform.

NEW BUILD - Super Durable High Density Polyethylene Versatile Dive Boat

ID: 1592

HIGH BUOYANCY, SUPERIOR TENSILE STRENGTH, SHOCK ABSORBANT, HIGH GRADE HDPE, HIGH FREEBOARD AND NUMEROUS HANDHOLDS, LIGHT WEIGHT, SPECIFICALLY DESIGNED FOR DIVE PURPOSES.

NEW BUILD - Multipurpose Pontoons

ID: 1575

It is with a great  deal of pleasure that we announce that SeaBoats can now offer the full range of aluminum boats produced in Spain by Moggaro Aluminium Yachts. With more than 15 years in activity , Moggaro has designed and built aluminum boats for customers coming from over 30 countries and 4 continents. The design portfolio includes jet-boats, dive-boats, interceptors, passenger-boats, pleasure boats and workboats of various types. Moggaro 500 and Moggaro 600 are multipurpose pontoons built in aluminium to very high standards and specifically designed for tourist services where small dimensions and/or low capital investment are required. Moggaro aluminium Pontoons are boats of great stability that are characterized by maximum comfort and a variety of designs and styles. As if it were a living space in a house or hotel, you can distribute, decorate and adapt its uses thanks to the modular, simple and economical design.  With these boats the visitor will really feel like he is living in the sea. These pontoons can be shipped anywhere at very reasonable costs in standard containers and once at destination they are easily assembled by two people in a day or two. Models include : Party Pontoon, BBQ Pontoon, Karaoke Pontoon, Family Pontoon. The possibilities of this boat are endless and thanks to the modular assembly system the same Pontoon can be modified in a second time to offer different layouts.

NEW BUILD - 9m LCT (one new hull available)

ID: 1490

We offer this 9m aluminium landing craft for those who want simple and cost effective transport opportunities to carry passengers or cargo to secluded locations and beaches.

NEW BUILD - 12m Multirole Vessel

ID: 820375

In the aftermath of the oil spill which resulted from the grounding of the container ship Rena on the Astrolabe Reef in New Zealand’s Bay of Plenty, Auckland Council identified the need to improve Auckland’s own readiness to respond to a similar incident and set about to acquire a new vessel for this purpose. Early in the process it was identified that oil spills are (thankfully) rare events and that it made sense to build a vessel which could perform other tasks in support of operating and maintaining Auckland’s busy harbour. Auckland Council put out a request for proposal to design and build a vessel with multiple requirements: to be capable of servicing the entire Auckland Inshore Limits in a range of weather conditions; to carry and deploy specialist oil recovery and dispersal equipment; to recover debris from the water or to tow stricken vessels away from danger; to carry vehicles to Hauraki Gulf islands; to support Police dive teams; to maintain harbour and Hauraki Gulf infrastructure; to be transported by road to Manukau Harbour and other regional locations. It was to be a simple, easy maintenance vessel with minimal fit out, outboard powered with minimum on-board services, designed to be operated by a diverse mix of crew, sometimes during periods of urgency and high pressure. The result is an extremely robust, well-built vessel, purpose designed in every detail to reflect the input of the customer. With a relatively deep vee hull form and substantial overall displacement, HM5 is a very seaworthy and capable vessel in which the Harbourmaster’s team has confidence to attend any emergency. A manually operated folding bow door provides vehicle access without compromise to the reliable, easy maintenance brief. A high-capacity hydraulic crane, powered by diesel power pack, enables autonomous loading/unloading from other vessels or shore side. A comfortable, fully enclosed wheelhouse provides warmth and shelter to the crew, with a dedicated toilet compartment accessed from the aft deck.

NEW BUILD - Watercraft Clam

ID: 1067

Designed for cleaning the bottom of the nurseries , for the collection , the storage and selection of clams. Its a hull with flat bottom having installed at the bow a belt conveyor equipped with a particular device (patented) for the removal of the bottom and on the central bridge, approximately 35 square meters, it is possible to install the equipment ( screens, pumps, selectors clams, etc ). Vessels of this type are provided in almost all the Venetian lagoon and several consortia of Chioggia Fishermen, Goro and surroundings . Thanks to sophisticated machinery installed on board, the clams are unloaded from vessels already packaged, ready for purging in the sheds. The innovation of these vessels has greatly facilitated the work of the fishermen that before the introduction of this vessel, in the 90s, everything was done by hand.

NEW BUILD - Blyth 14m Series

ID: 588088

Blyth Workcats are built entirely in the UK from one piece tooling for exceptional strength. All engineering and electronics are installed by in-house engineers and stainless steel fittings are custom made within their own fabrication workshop, offering a completely bespoke service to our clients.The company works closely with naval architects and surveyors of the highest professional standing and we take pride in our ability to construct vessels to meet or exceed the rigorous standards required for MCA Code of Practice, Seafish, Irish P5 and MCA P5&6.The original Blyth 33 has now become the Blyth 10m, evolving and improving with time and experience, making her performance second to none. In recent years, the company has developed 11, 12, and 14m catamarans with a wide selection of 14 Cats delievered to date.

NEW BUILD - Blyth 12m Series

ID: 588087

Blyth Workcats, based in Essex, England specialises in the design and build of GRP catamarans for commercial operators across a wide range of different industries. The company designs and builds customised boats, working closely alongside clients to develop and deliver a boat unique to their individual needs whether it be for charter angling, diving, commercial fishing, passenger carrying, crew transfer or survey work. Blyth Workcats has been building boats for more than 20 years and supplied vessels all over the world from the Falkland Islands to Dubai, Australia to Gibraltar and established an enviable reputation within the industry as suppliers of stable, sea-going, value-for-money boats that get the job done. Blyth Workcats has its own ‘in-house’ technical department enabling the company to tailor an existing, proven, design to meet specific customer needs. The company employs a highly skilled, vastly experienced workforce and is proud to have achieved accreditation to ISO 9001, ensuring every boat is built to the highest possible standard.ISO_9001. Take a look at some examples of the 12m Series already supplied.

NEW BUILD - 14.95m Workboat

ID: 424386

This 14.95m Workboat is suitable for a range of applications. Survey: 2C. Main Engine: 2x CAT 3306 220kW each. Gearboxes: 2x twin plate gearbox and propeller shaft. Top Speed: 8.5 knots approx. Fuel: 11,600 litres. 4 Point Anchoring System. A-Fame: 10 Tonne. Deck Winch: 30 Tonne central deck winch. Deck Crane: 4.6 Tonne Palfinger PK12500C. Moon Pool: 400mm diameter