Pontoons

ID: 1134

Material: steel, stainless steel or aluminum. Technical Description: This is more modular caissons can be assembled between them for the realizations of large barges or floating platforms , on which you can load work tools , cranes , pile drivers , etc. They are particularly versatile and modular in different combinations of shapes .

NEW BUILD - Combination Harvester & Pickup Vessel

ID: 1048

Material: steel, stainless steel or aluminum. Technical Description: Craft result from the combination between the vessel Harvester and the pick-up vessel , for which features of the cutting tape and collection , of a central belt which transfers the collected material came from the first tape up to the storage bin and an arm charger for the material discharge. Unlike the Pick-up, you can work with a single operator who, once filled the entire storage area, is transferred in the crane cab command to download the material. They can be propelled with screw propellers with antialghe system or with paddle wheels. The draft can be as little as 35-40 cm . Considering the hull distance from the edge to the collection point reached by the arm, the pick-up can also collect material on the banks. There are built in series , therefore it is possible to choose with the client the possible combinations of cutting, collection, storage, unloading, size, etc.

NEW BUILD - Watercraft Draga

ID: 1047

Natanti acts to ' opening of waterways in swampy areas by means of an excavator arm .  They have a central container , which can be hinged on one side, on which is loaded the dredged material to be discharged onto the ground with operation yield security thanks to  standing places stabilizers aft .  Where required, the container can act as a compactor, or, thanks to a particular mechanism,  squeezes the wet algae for compacts and reduce clutter. They can be propelled with screw propellers with antialghe system or with paddle wheels. The draft can be as little as 30-35 cm. Considering the hull distance from the edge to the collection point reached by the arm, the dredger can also operate on the shores. There are built in series, therefore it is possible to choose with the client the possible combinations of cutting, collection, storage, unloading, size, etc.

NEW BUILD - Amphibians

ID: 1060

Material: steel, stainless steel or aluminum. Technical Description: Any type of our production vessel for the cutting and collection of algae can be transformed into amphibian and therefore work both in water and on land , being able to climb to the shore due to the three pairs of rubber wheels twinned or tracks to be fitted. The cutting equipment solutions can be decided with the customer.

NEW BUILD - Watercraft Notching Star

ID: 1044

Small to medium workboats fitted at the stern with twin screw propellers for propulsion and two bow propellers that are star-shaped, independent and adjustable in depth, adapted to the cutting of algae.  These are particularly suitable for the opening of waterways in dense vegetation. Dimensions and working characteristics are defined in collaboration with the customer.

NEW BUILD - Watercraft Clam

ID: 1067

Designed for cleaning the bottom of the nurseries , for the collection , the storage and selection of clams. Its a hull with flat bottom having installed at the bow a belt conveyor equipped with a particular device (patented) for the removal of the bottom and on the central bridge, approximately 35 square meters, it is possible to install the equipment ( screens, pumps, selectors clams, etc ). Vessels of this type are provided in almost all the Venetian lagoon and several consortia of Chioggia Fishermen, Goro and surroundings . Thanks to sophisticated machinery installed on board, the clams are unloaded from vessels already packaged, ready for purging in the sheds. The innovation of these vessels has greatly facilitated the work of the fishermen that before the introduction of this vessel, in the 90s, everything was done by hand.

NEW BUILD - Watercraft Pickup

ID: 1059

Natanti acts to cutting, collection, grubbing and infested vegetation drain and floating solid waste or semi-submerged . The cutting system and frontal collection consists of a U-shaped cutter toolinstalled on a conveyor belt, adjustable in depth, able to charge what has been collected in the central storage container.  They can be propelled with screw propellers with antialghe system or with paddle wheels.

NEW BUILD - Milling Cutter

ID: 1042

This is watercraft equipped with rollers with knives or zappette acts grubbing of roots at the bottom of the channel, or lagoon, and all 'oxygenation of the same. They also allow pianeggiare the seabed after the grubbing operation. They are equipped with two or four rollers depending on the size of the hull. They can work at times even in the absence of water, moving on the ground thanks to the rollers.

NEW BUILD - Weeders Mono / Twin Propeller

ID: 1041

These motorboat weeders are designed with the customer to meet the specific job requirements. The T rattasi is a small motorboat designed to only cut algae, reeds and bushes on the shore, in the canals or small streams. The material cut in the middle of the cutter bar overturned T placed at bow , tilt to the right and left by 90 °, it remains to float in surface and, thanks to the current is conveyed in a single collection pointgenerally represented by small dams consist of gates ever made by us.

NEW BUILD - Mini Harvester

ID: 2172

Nettuno Motobarche is an Italian shipyard specialized in river, shore and harbour maintenance workboats.  They design and build aquatic weed harvesters in a range of sizes to meet all needs with many models in service in various parts of the world. HARVESTER MINI is the smallest in their range and it is designed for easy transportation and deployment. This workboat is especially developed for removing plant growth from embankments and waterway, and thanks to her a limited draft and compact size can operate very close to the shore and in areas where larger vessels would not be able to work. These environments are usually very hard on machinery of any kind and in order to withstand years of hard use and neglect HARVESTER MINI is entirely built in stainless steel with the added protection of an epoxy coating. The boat can be equipped with a variety of cutting devices to be able to operate even in difficult situations.  There are also additional features that can be added to the standard model, including protection for the pilot, storing tanks, etc. Engine maker and fuel tank capacity are per Owner’s requirements. 

NEW BUILD - Nettuno Motobarche HARVESTER

ID: 4150

The HARVESTER is a workboat equipped with a frontal conveyor belt , adjustable in depth and equipped with cutter bars (one horizontal and two verticals). The materials collected are then transferred to a central storage conveyor belt that moves them toward the rear or lateral discharging conveyor belt. The discharging conveyor belt, once near the shore, can discharge the weed directly on the ground, on a truck or on another boat.