2x Yokohama Marine Fenders

ID: 4631

Two (2) Yokohama Marine Fenders 11' diameter x 21' long. Initial Internal Pressure: 7.3 kips. Energy Absorption: 1339 kips. Reaction Force: 678 kips. Hull Pressure: 3.00 kips per sq. ft.. Total Weight: Approx. 4,123 lbs.

4x Pneumatic Rubber Fender (Yokohama Tye)

ID: 4388

Pneumatic Rubber Fender (Yokohama Tye) With chain and tire nets. 2.5m Diameter x 5.0m Length. Initial Internal Pressure: 50KPa. Manufacturer: Dolphin Marine. Synthetic-Tyre-Cord Layer Reinforcement. This layer made of synthetic-tyre-cord fabric, which maintains the internal air pressure of the fender. Inner Rubber Layer. Liner of a rubber membrane that seals the pressurized air inside the fender. CONSTRUCTION OF FENDER BODY: The body of pneumatic rubber fender consist of 3 different layers. Outer Rubber Layer: This rubber layer that covers the outside of the fender to protect the cord layer and the inner liner rubber.

3x 2011 Caterpillar C280-8 Offshore Generators (Never Used)

ID: 4293

Model: C280-8 / I-8, 4-Stroke-Cycle-Diesel. Rated Speed: 900 RPM. Generator: KATO ENGINEERING INC. Model: AA28661000 Potency: 3.142,9 Kwa / 2.200 Kw. 60Hz 346/600 Volts. 3.024 Ah. 3 Phase

Two (2) Conduit Reels

ID: 3938

2-Almon Johnson Conduit Reels, Series 622. Two Hagglunds Denison radial piston Hydraulic motors drive ea reel 30' wide x 12' deep x 14'6" tall, 8' diameter spool. 35,000 lb line pull at 100 fpm. 3,040'/reel of 8" OD, 6" ID, Uniroyal Manuli Fuel transfer hose. 740 psi working pressure. Hose has not had fuel run through and in excellent condition. Control panel for hydraulic motors and level wind included. Replacement cost of hose alone over 200k and will sell separately. Can economically ship by rail ie: 22k to transport by rail to Chicago. Many more destinations are available. $95,000 for all and 10k to load on rail cars

Water Plant Desalination Mineral for Sale

ID: 3877

The plant is in very good condition and unused. It’s a robotic plant as well. This plant is for the sea water and then filtering it, filling, bottling and packing. The plant is all inclusive, new, and unused.

Crawler Crane Terex-DEMAG CC 2500-1

ID: 3818

Crawler Crane Terex-DEMAG CC 2500-1 (max. lifting capacity 500 t at 9 m / 75%)

2x 5T North American KBC Crane for Sale

ID: 1632

As Rigged Crane Data: Maximum Moment: 1,343 Kn - M, Corresponding Axial Load: 20, 870 Kg, Load @ Max Moment: 5.8 Mt @ 15 M. Maximum Axial Load: 28, 290 Kg, Corresponding Moment Load: 1,183 Kn - M, Load @ Max Axial: 7.1 Mt @ 10.5 M. Safe Working Load: 5.1 Mt. Corresponding Moment Load: 1,306 Kn - M. Corresponding Axial Load: 20,070 Kg.

Kocks Goliath Crane

ID: 1473

This unloading equipment comprises one bridge type ship unloader working with a self propelled grab trolley with grab slewing device. The unloader will be able to charge the unloaded material onto the pier-conveyor. The unloader will be electrically driven on a rail system. The maximum wheel load will not exceed 627.85kN, spaced 1100/1650 mm during operating conditions. Handled Material: Material / Bulk Density; Iron Ore Pellets: 1.9 – 2.2 t/m3; Coal: 0.8 – 0.9 t/m3; Coal Coke: 0.5 – 0.65 t/m3; I.O. Additives: 2.0 – 2.6 t/m3. Ships to be unloaded: Following data are showing the different sea-going ships which the unloader will be able to serve: Ship Type (dwt) 72,000, Length: 245m; Ship Type (dwt) 130,000, Length: 280m; Ship Type (dwt) 115,000, Length: 270m. The ship-unloader will be installed at the bulk terminal of Lucchini Steel at Piombino Italy.

2 units Rolls-Royce Olympus Marine Gas Turbines

ID: 3033

Two Rolls-Royce Olympus Marine Gas Turbines.  17.5 MW each. Fuel: Distillate fuel oil. Item 1 - 1 number: RR Olympus Marine Engine model 2014: TTSN* 1300 hours. Item 2 - 1 number: RR Olympus Marine Engine model 2020/14: TTSN* 637 hours.  *Total Time Since New. Note: All engines supplied with Rolls Royce Certificates and Documentation.

Barge Pontoons with many possibilities.

ID: 1174165

BARGE – Pontoon / helipad /marina 17m x 3.2m. Ideal to take a deck 20m x 9m. 2 x pontoons of 1430mm diameter, each weighing 12 tonne. Each pontoon consists of 7 Compartments at 2435mm long. CUBIC CAPACITY / VOLUME: 30m3 each. Fabricated from 12mm mild steel plate. Each compartment plumbed with 50mm flanged fill and pump out pipes. Each fitted with 4 bollards and forward and aft tow points. Suitability – multiple of applications.

Boat Winch

ID: 1164526

Unused Boat Winch – Clark & Chapman double drum, double gypsy. sing – 17hp, 220v, 66amp with slip clutch. Suitability – vessel over 25m.