148m Self-unloading Vessel / Self-discharge Sand Carrier

Listing ID - 4221
Description	148m Self-unloading Vessel/Self-discharge Sand Carrier
Date Launched	2022
Length	148m (485ft 6in)
Beam	23m (75ft 5in)
Draft	5.1m (16ft 8in)
Note	Guangzhou Engine
Location	China
Broker	Ivan Colaco ivan.colaco@seaboatsbrokers.com +61 401 695 814
Price	USD 7.3 million
View As PDF

This ship is a stern type, bulbous nose, dual-engine, dual-propeller, dual-rudder, and diesel-powered self-unloading sand boat. There is a poop at the end And three deckhouses. Five cargo compartments are arranged in the cargo compartment area, and the first conveying hanger is retracted into the hull and fixed firmly when it is sailing. This ship is a cargo ship that uses its own belt conveyor to unload sand (cargo density 1.3–1.5t/m3). Must be strict when loading The flat cabin is flattened to the bulkheads around the cargo hold.

148m Sand Carriers (Self-unloading type vessel)

Built Year: 2022

LOA: 148m

Beam: 23m

Depth: 7.8m

Light Draft: 2.801m

Loaded Draft: 5.1m

Loaded Displacement: 12513.200t

Light Displacement: 3807.847t

Main Engine: 2100hp + 2100hp Guangzhou Diesel Engine

Conveyor Main Engine: 2100hp Guangzhou Diesel Engine

Gross Tonnage: 7160t

Net Tonnage: 4009t

Marine Equipment

Host

Model: 6320ZCd-6E

Type: four-stroke, in-line single-acting, cylindrical piston, irreversible

Bore/Stroke: 320/440mm

Continuous Power: 1470kW
Calibration Speed: 525r/min

Fuel Consumption: 196g/kW.h
Oil Consumption Rate: 1.2g/kW.h
Starting Method: Compressed air

Gearbox

Model: MG49.54

Actual Speed Ratio: 3.4348:1

Nominal Speed Ratio: 3.5:1

Main Generator Set

Model: CCFJ150J

Diesel Engine

Model: SC7H250CF2
Type: in-line, four-stroke, direct injection

Rated Power: 168 kW

Rated Speed: 1500 rpm

Cooling Method: Double-circulation water cooling

Fuel: Diesel
Starting Method: Air start

Dynamo

Type: Brushless AC marine synchronous generator

Power: 150kW

Rotating Speed: 1500rpm

Rated Voltage: 400V

Rated Frequency: 50Hz

Parking Generator Set

Model: CCFJ75J

Diesel Engine

Model: SC4H160CF2
Type: in-line, four-stroke, direct injection

Rated Power: 105 kW

Rated Speed: 1500 rpm

Cooling Method: Double-circulation water cooling

Fuel: Diesel
Starting Method: Air start

Dynamo

Type: Brushless AC marine synchronous generator

Power: 75kW

Rotating Speed: 1500rpm

Rated Voltage: 400V

Rated Frequency: 50Hz

Engine Room Air Compressor

Model: CVF-43
Type: Vertical, air-cooled, two-stage compression

Displacement: 36m3/h
Pressure: 3Mpa
Rotating Speed: 1500r/min

Power: 11Kw

Conveying Diesel Engine Air Compressor Group

Model: CZ20/30FZK

Type: Vertical, air-cooled

Displacement: 20.4m3/h

Pressure: 3Mpa

Rotating Speed: 1500r/min

Power: 5.5Kw

Main Air Bottle

Model: A0.30-3

Volume: 0.30m3

Pressure: 3MPa

Miscellaneous Air Bottle

Model: A0.25-1.0

Type: Vertical cylindrical type

Volume: 0.25m3

Pressure: 1MPa

Control Air Bottle

Model: A0.10-1.0

Type: Vertical cylindrical type

Volume:0.10m3

Pressure: 1MPa

Quick Closing Valve Central Box

Cylinder Volume: 40L
Work Pressure: 1.0Mpa

Number of control air channels: (to be determined)

Axle and rudder steel casting system, stern tube sealing device, rudder system sealing means

No.: 2

Shaft Grounding Device

No.: 2

Conveyor Built System

Conveyor Belt Drive System

No.: 1

Conveyor Belt Diesel Engine

Model: 6320ZCd-6E
Type: Four-stroke, in-line single-acting, cylindrical Piston, irreversible Bore/Stroke:320/440mm
Continuous Power: 1470kW
Calibration Speed: 525r/min
Fuel Consumption: 196g/kW·h
Oil Consumption Rate: 1.2g/kW·h
Starting Method: Compressed air

Conveyor Belt Diesel Engine

Model: MG45.52
Speed Ratio: 2:1

Conveyor Belt Reducer

Model: ZD2880-3.5-0

Speed Reduction Ratio: 3.5:1

Conveyor Belt

Width: 2.5m

Speed: ~480 m/min

Drive roller, steering roller cylinder

D=1800/1500

L=1500

Conveyor Head Telescopic Frame, Traction Winch

Four-chord truss metal structure

Conveyor tightening and steering roller

Quantity: 1

Hopper Gate Hydraulic Pump Station

Axial piston pump

Hopper Gate

Quantity determined on site

Grooved Idler, Parallel Bottom Roller

Quantity determined on site

Cargo Tank Bilge Pump

Type: Vertical self-priming mud pump

Flow: 180m3/h
Discharge Pressure: 20m
Motor Power: 30kW

Drive Mode: Electric motor

Cargo tank bilge pump (spare use)

Type: Vertical self-priming mud pump flow:180m3/h
Discharge pressure: 20m
Diesel engine power: 30kW

Drive mode: Diesel engine

Conveyor Belt Diesel Engine Empty Cylinder

Model: A0.30-3

Volume: 0.30m3

Pressure: 3MPa

Fuel Transfer Pump

Model: KCB-200

Type: Horizontal gear pump

Flow: 12m3/h

Exhaust Pressure: 0.33Mpa

Motor Power: 4kW

Lubricating Oil Transfer Pump

Model: KCB-135

Type: Horizontal gear pump

Flow: 8m3/h
Exhaust Pressure: 0.33Mpa

Motor Power: 2.2kW

Dirty Oil Pump

Model: KCB-83.3

Type: Horizontal gear pump

Flow: 5m3/h
Exhaust Pressure: 0.33Mpa

Motor Power: 2.2kW

Main engine lubricating oil is pressed into spare pump

Model: YCB40-0.6

Type: Gear pump

Flow: 40m3/h
Exhaust Pressure: 0.6Mpa

Power: 15kW

Main Engine Oil Extraction Pump

Model: YCB40-0.6

Type: Gear pump

Flow: 40m3/h
Exhaust Pressure: 0.6Mpa

Power: 15kW

Main Engine Lubricating Oil Pre-Supply Pump

Model: KCB-135

Type: Horizontal gear pump

Flow: 8m3/h
Exhaust Pressure: 0.33Mpa

Motor Power: 2.2kW

Conveyor Belt Diesel Engine Pre Supply Pump

Model: KCB-135

Type: Horizontal gear pump

Flow: 8m3/h
Exhaust Pressure: 0.33Mpa

Motor Power: 2.2kW

Main Engine Sea Water Backup Pump

Model: CLH150-250A

Type: Vertical Centrifugal pump

Flow: 129m3/h

Head: 18.5m

Power: 15kW

Main Engine Fresh Water Backup Pump

Model: CLH80-160(I)A

Type: Vertical Centrifugal pump

Flow: 121.6m3/h

Head: 21m

Power: 11kW

Bilge Ballast Pump

Model: 125CLZ-16.5A

Type: Vertical Self-priming Centrifugal pump

Flow: 150m3/h

Head: 28m

Power: 22kW

Fire Pump

Model: 100CLZ-8

Type: Vertical Self-priming Centrifugal pump

Flow: 80m3/h

Head: 50m

Power: 22kW

Emergency Fire Pump

Model: 80CWY-55

Type: Self-priming Centrifugal pump

Flow: 60m3/h

Head: 55m

Power: 22kW

Oily Sewage Transfer Pump

Model: 32CBZ-30

Type: Horizontal self-priming centrifugal pump

Flow: 8m3/h

Head: 30m

Power: 2.2kW

Domestic Sewage Discharge Pump

Model: 0.5PWF-20

Type: Crushing pump

Flow: 5m3/h

Head: 25m

Power: 4kW

Stern Tube Oil Pump

Model: CS-32Y

Flow: 48L/min

Indenter: 0.25 Mpa

Engine Room Fan

Model: JCZ-90B

Type: Marine axial fan

Flow: 36000m3/h
Full Pressure: 670Pa

Power: 11kW

Conveyor Belt Diesel Engine Wind Machine

Model: JCZ-90B

Type: Marine axial fan

Flow: 36000m3/h
Full Pressure: 670Pa

Power: 11kW

Domestic Sewage Treatment Plant

Model: CBM-20
Type: Biochemical treatment
Number of Users: 20 people
Hydraulic Load: 1.6m3/d
Emission Standards: BOD5≤25mg/L ; COD≤125mg/L;TSS≤35mg/L;coil group≤100 induvial/100mL;PH: 6~8.5

Total power: ~3kW

Bilge Water Oil-Water Separator

Model: CCF-1.0

Processing Capacity: 1.0m3/h

Emission Standards: ≤15ppm

Control Method: automatic
Oil discharge method: automatic/manual

Heating method: electric heating

Total Power: ~3kW

Assembled sea and fresh water pressure power water tank
Model: ZYG(S)0.4/0.4

Volume: 0.4 m3
Work pressure: 0.4 Mpa
Supporting water pump: 1.5CWZ-2 (3 Unit/group)

Supporting water pump power: 2.2 kW

CO2 Fire Extinguishing System

30 bottle(68L)
30 The bottles are all used for cabin protection, 12 Bottle protection conveying diesel engine room

Engine Room Driving

Lifting Capacity: 1.0T
Lifting Height: 2~6m

Double-Head Grinder

Wheel Diameter: φ225mm

Power: 0.6kW

Bench Drill

Maximum Drilling Diameter: φ20mm

Motor Power:0.6kW

Vise

Clamp Width: 250mm

The details of all vessels are offered in good faith but we cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. Any buyer should instruct their agents, or their surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to sale, price change, location or withdrawal without notice.

148m Self-unloading Vessel / Self-discharge Sand Carrier

Listing ID - 4221